Tyrrell’s Wines – 350kW
Tyrrell’s Wines goes solar Solgen Energy Group was awarded the design and installation of the Tyrrell’s Wines 350kW solar power system, […]LEARN MORE
Solgen Energy Group designed, installed and commissioned over 1.25MW of solar power installations on major buildings owned by the City of Sydney Council for the City of Sydney Solar Power Project. The systems have been installed on 30 properties throughout the municipality.
The City of Sydney Council set a target of achieving a 70 per cent reduction in carbon emissions across the City of Sydney local government area and to have 25 per cent of its energy needs coming from renewable resources by 2030.
The City of Sydney Solar Project required ample innovation in the design and construction methodology as some of the sites contained:
• Heritage conservation
• Aesthetic architectural requirements
• Integration of systems into glass facades
• Elimination of high corrosion and high wind issues for sites near water
• High voltage requirements
• CBD access requirements
During the design stage, Solgen liaised with the town planning department in order to ensure the aesthetic integrity of each site was maintained. All planning approvals were arranged and any heritage restrictions were identified and adhered to.
Key facts about this solar system project:
|Client:||City of Sydney Council|
|Location:||Central and South Sydney City|
|Solar system peak capacity:||1.25MWp|
|Panels:||Trina Solar Poly 250W |
Schott 100W Amorphous panels
|Green savings:||2,073 tonnes of emissions per annum|
|Solar electricity generated:||1,958MWh per annum|
Structural engineers were consulted to ensure that each roof would bear the load of the PV system. Where ballast systems were used, the structural engineering team identified the ballast weight necessary to meet the down force required at each panel individually.
Solgen liaised with the Distribution Network Provider (DNSP) on each site to identify special protection requirements, implement the protection according to the Solgen design and perform a witnessed safety testing.
Where Building Integrated Photovoltaic (BIPV) is planned, Solgen liaised with a glazing professional in order to design a custom framing and mounting system and specified custom BIPV modules from the preferred solar panel manufacturer.
The City of Sydney Solar Power Project is estimated to deliver a 4.5 per cent reduction in the City’s overall greenhouse gas emissions and 12.5 per cent of the City’s own energy requirements.
The installation of solar panels supports the target of the City of Sydney Council to reduce the City’s overall greenhouse gas emissions and use renewable resources. The key benefits of the solar installations include: